Install Garbage Disposal

How To Install Garbage Disposal Personally Or Just Use a Professional

A garbage disposal unit is one of the hardest working appliances in a home. It is good to make sure you follow the best possible method for installing it which will give you years of problem-free service from a piece of equipment that gets a real workout. When uncertain about whether you should install garbage disposal yourself or just use a pro, here are some details to consider. Take the time to read the following article carefully before you make up your mind.

The kitchen scraps need to be fine enough to pass through a drainage pipe.

In order to do that, the different mechanical parts of the garbage disposal team up to provide an extremely rapid chopping and grinding action. Known as the shredder ring and the impellers or blades, these parts swing into action when the switch is flipped activating the motor. Originally, the food scraps are collected in a separate section of the unit. Once the power is on, the food scraps are forced through the chopper ring and ground fine by the impellers. This action continues until everything is almost liquefied and ready to be flushed down the drainage pipe with tap water.

If you want to get a motor that is powerful enough to grind food scraps very fine, it might be advisable to get a unit with a three-quarter horsepower motor.

Some professionals say that a one-half horsepower motor is enough. But the main thing to be sure of is that you have a motor that is powerful enough to do the job thoroughly.

There is always the risk of unknowingly running the equipment too long. Without a reset button, the motor and wiring could easily burn. So a reset button is a worthwhile prerequisite to look for when you are shopping for a unit.

There is always the possibility that a stubborn piece of food scraps gets jammed causing everything to freeze up. That is why it is advisable to look for one that has a shredder ring that can be manually worked.

One of the main considerations is being sure to have a power source and electrical outlet in close proximity to where you plan to use your unit.

Although the installation procedure can be pretty straightforward, it is advisable to know something about wiring and plumbing.

Before replacing the sink flange, the metal edge that protrudes from the bottom of the sink, with one from the unit, it is crucial to follow the safety rules about working with electricity. The main one being to be sure that there is no electrical power running through the lines. You might even want to throw the breaker switch before starting.

At this point, you might want to consider whether to get some professional installer to make sure that everything is fitted correctly. Even though installation may seem pretty simple, without any electrical or plumbing know-how, you could do a faulty job without knowing it.

Another important consideration is making sure the electrical wires are attached in the right sequence to your house wires. If this is not done correctly, a short or even electrical fire could result. In any case, if you do decide to do the job yourself, the wires for the unit are located beneath the plate on the bottom. Once you have located these and connected them, the electric wiring job is done.

It is important to check that all the joins are secure and not leaking once the discharge tube of the unit has been connected to the sink drainage pipe.

Even though installing a disposal unit may appear to be a fairly easy process, the results could be disastrous if you do not have any experience with wiring or plumbing.

So after reading this entire article, you may find yourself trying to decide whether to install garbage disposal yourself or just use a pro. Take time to consider what will work best in your particular situation. You may find that calling on a professional may cost you less headache and repairs in the long run.

Install Garbage Disposal with Dishwasher,Install Garbage Disposal Double Sink,Install Garbage Disposal to Sink,Install Garbage Disposal Drain